just got a little gemini for my wife to buzz around in. As i am sure she will forget to change tanks/purge ect. I decided it was best to blend fuel for Ted. [its a barsTed to work on] currently blending 80/20, runs fine but starts very rough and usually takes two or three attempts at double glow cycle coughs, clouds of black smoke before Ted is running. I havnt experimented with diff blend ratios yet ,but i was having a think.
What if I set up an lpg jet with a solenoid operated by the starter solenoid,then by adding say a five second timer to the gas soleoid, as the starter was hit gas would be added for 5 seconds. So lets say we get a fire in the first second and the starter is released gas flows for a further 4 seconds until the engine runs clean.
Any thoughts please that may save me alot of time and effort.
HMmm more thinking,,if you hit the starter and it didnt fire you would still have 4 seconds of gas going into the manifold
maybe a push button would be better and simpler,, might be handy to press while overtaking too
What if I set up an lpg jet with a solenoid operated by the starter solenoid,then by adding say a five second timer to the gas soleoid, as the starter was hit gas would be added for 5 seconds. So lets say we get a fire in the first second and the starter is released gas flows for a further 4 seconds until the engine runs clean.
Any thoughts please that may save me alot of time and effort.
HMmm more thinking,,if you hit the starter and it didnt fire you would still have 4 seconds of gas going into the manifold
maybe a push button would be better and simpler,, might be handy to press while overtaking too
Comment