PDA

View Full Version : Latching Solenoid valve with 12mm bore



spock505
19th June 2008, 09:43 AM
It would be good to know if there is any interest in using alternative valves -

These are high spec large bore specifically designed for wvo/svo use with a solenoid operation, ie only need a single pulse to switch and not continuous current.

Rough prices at the moment would be 100 UK sterling a pair + shipping for a minium of 6 pairs.

I'll move this post across to the correct thread and post further details if peeps are interested.
EDIT: I have copied it here from the original location and changed the thread title. Tony

Tony From West Oz
20th June 2008, 12:29 AM
Spock505,
Please post the valve specifications and a photo so we can see what it looks like.

Regards,
Tony

spock505
20th June 2008, 07:33 AM
Thanks Tony,

Heres a couple of pics, the outlets can accommodate either 8mm (shown) for the diesel feeds or 10mm for veg.

Valves are supplied with quick release jack for ease of removal.

Fittings and pipe maybe available separately

http://i225.photobucket.com/albums/dd83/spock500/aS5000964.jpg

http://i225.photobucket.com/albums/dd83/spock500/aS5000966.jpg

Tony From West Oz
21st June 2008, 03:14 AM
David,
I can only see 2 ports on this valve.
Is it a changeover valve (3 port) or an on/off valve (2 port)?

Regards,
Tony

spock505
21st June 2008, 07:02 AM
Tony,

The two outlets are shown, the inlet is on the otherside -

Should hopefully have one fitted next weekend so wil take a few more pics showing all sides.

There are two holes in the bottom for upright mounting (recomended)

During testing the 10mm nylon pipe proved sufficent for high flow, return to tank system such as the Mercedes employ.

Its also high pressure for the HDi and negates the use of ring clamps.

Best,

Tony From West Oz
22nd June 2008, 12:44 AM
David,
Can you provide total cost for the 6 pairs (12 valves?) to Australia, including freight?
What payment methods can you accept?

Regards,
Tony

spock505
22nd June 2008, 07:58 AM
David,
Can you provide total cost for the 6 pairs (12 valves?) to Australia, including freight?
What payment methods can you accept?

Regards,
Tony

Tony,

Message sent -

Best,

pete
22nd June 2008, 06:47 PM
David

How much for one pair with freight.

Thanks Pete

spock505
25th June 2008, 08:14 AM
David

How much for one pair with freight.

Thanks Pete

Hi Pete,

Thanks for your interest,

At the moment its a case of canvassing interest as not economical to send them across the pond in small numbers. I have your details so as soon as we know I will drop you a PM.

Best,

craigcurtin
23rd July 2008, 05:02 AM
I would be interested in 3 of these for an upcoming conversion - do you have a sufficient quantity to ship to Aus yet and at what price ?

Craig

spock505
25th July 2008, 09:40 AM
I would be interested in 3 of these for an upcoming conversion - do you have a sufficient quantity to ship to Aus yet and at what price ?

Craig

Still working on this one but will keep you posted.

Thanks,