trevor w
Biofuels Forum Newbie

Hi all, Wondering if anyone can advise as to the problems with 2004 Peugeot 307 2.0 L Diesel, bought 3.5 years ago with 118K on the clock. Have done 43K on home made B100 with no problems, no visable leaks, has a Siemens/Bosch IP.
The last few weeks it has decided to refuse to start when hot, after 10-15 minutes will start normally, my investigations have suggested that when hot, the bIP will produce enough pressure to open the spring loaded injectors to allow fuel in to the cylinders. a
Any experience with these symptoms would be appreciated
Also any advice-- a reliable diesel mechanic in Melbourne.
Options as to Rebuild/Exchange/ Purchase IP.
Access to Peugeot manual for IP removal / installation
Regards Trevor

Hi All, Wondering if anyone can advise as to problems with 2004 Peugeot 307 2.0L Diesel, bought 3.5 years ago with 118K on the clock. Have done 43,000Ks on home made B100 with no problems. no visable leaks, has a Siemens/Bosch IP.
The last few weeks it has decided to refuse to start when hot, after 10-15 minutes will start normally, my investigations have suggested that when hot, the IP will not produce enough pressure to open the spring loaded injectors to allow fuel into the cylinders.
Any previous experience of this symptom would be appreciated.
Also any advice as to 1.) a reliable diesel mechanic in Melbourne
2.) options as to rebuild/exchange/purchase IP
3.) accesas to Peugeot manual for IP removal/intallation
Regards Trevor