Search:

Hi,
​I recently sold my 80 series after 10 years on SVO. I have the hydra force valves, Toyota oil filter housing, with a 12v heat wrap, and a heat exchanger.
1 valve was for the oil/diesel feed,...

Thank you this has been sold

Hello everyone,
I have recently de commissioned my 80 series after 280,000 ks on Veg oil. after trying several basic settling methods of filtering my oils i ended up coughing up the dollars for a...

Hi all,
My 80 crunches 3rd, always has, I recently drained the oil and filled with castrol 4wd gearbox oil, I can't remember the wieght but it was the only oil repo had on the shelf for a 4wd box....

Hi Tony, dont want to hijack this thread so i will start a new post on the issues and some solutions i have encountered over the last month of pulling the system down on the land cruiser.
Thanks...

Interesting comments on the Fleet gaurd elements, i have been battling with starvation issues for a month now and have consequently pulled my entire system out , piece by piece , from the tank to the...

Hi Guys,
Yes i did read brians posts about his gunk a while ago, and this is not as bad. The WVO tank is the original 90ltr tank and has a protective coating on it that seems to be intact and...

Hi all,
Ive been having some performance issues with the 80 series on WVO. I thought it may be an injector issue as i change my filters every 5000ks and my oil is cold filtered to 1 micron. After...

All good info, i love my 80 series, i actually like the smaller size, great turning circle. I went from a xr6 ute to this and dont mind at all. all said above is true , not a fan of hills , but...

I have one with a bunch of filters , you can have it if you want it, pm me and ill post it for free. Cartridge filter that is. the filters are one micron. i use a different system now, so dont need...

Wow , ill have to stop singing the praises of these valves, the leaking was the part that i liked the most. Thanks for posting these
Patrick

Great video
My hydraforce have been great and ive had no leaks and no flow issues, i was surprised at there result, i thought being a 10mm orifice they would have good flow. I have been toying with...

hi spock, on a turbo engine you can activate the pump with a boost/pressure switch. As mine is non turbo i drilled in a vac switch and set it by hooking it up to a test light in the cab, driving and...

Sorry 83patrol, that was a link to ebay, that would be where i would get one.

Hi all,
83patrol, love that , where do i get one.
All the info i got was on the forums of devils own methanol injection and coolingmist. The pump i got from dc pumps in Adelaide via ebay for...

Its been a year since my conversion, and everything is going well. The only thing i have noticed is the cruiser blowing more smoke and down on power. i pulled an injector out, it was a little...

Vic. Melbourne , Edithvale, south east bayside 60-100 ltr, 1 micron cold filtered.
Cheers,
Pat.

Sorry , i will not have oil to share until further notice. Supplies are just keeping me going...

Hi mate, i could give you 80-90 ltr if you need, im in Edithvale, southern bayside.
Cheers
Pat

I believe its a sub 1 micron sediment, i have it in every part of my filter system and in my final filter in my cruiser. I green bag filter into 2 250ltr upflow tanks, pump through a 5 micron...

Hi Sean
Sorry about the delay in response. heres some pics of the coupling i have, unfortunately its 14mm. If i can get a 16mm drill bit i will drill one side out for you. the other end is 13mm....

What size is the shaft on your gear pump, i may have a coupling lying around, if it fits you can have it.
Cheers
Patrick

Have you tried it with a cordless drill ?. I hooked up one directly to the drive shaft of the gear pump, so it runs at 1:1. The cordless has a top speed of 1350 rpm. It moves more oil than i need. I...

Trekdog, i got them at Rover Hybrids Home Page. they were exy but the dollar was at 94c when i bought them. i got a 10mm for my feed and a 8 mm for my return. if your interested i would get them to...

I have 7 20ltr drums(140 ltrs) of liquidy fat, its what i scoop out of my pre filter on my WVO set up , I believe it can be used to make bio with , but i have no knowledge in this area, Its free if...

Great post guys, Ive done 10,000ks on my 3 way electric valves and had the oil temp up to 110c , you cant see where there at as far as flow selection , but i have illuminated switches in my cab for...