Search:

Moving into town, have large amounts of ss fittings, pumps, motors even instrumentation for reactors, Capella parts and cars, some 2C diesel Toyota parts. See following thread/ send me a message....

Well I have a s***load of these cars and parts. One nice 1994 (Comprex S/charger) Wagon I have been right through, still a couple of small issues but is registerable, 2 spare super chargers, another...

moisture mainly.

It's also thought the Hindenburg was started and accelerated by the use at the time of nitrocellulose as the 'dope' on the fabric. Not only did they use it to waterproof and tighten fabric-covered...

The blowtorch would be worth a try but since in that or a blower type burner the fuel is hot when it exits the nozzle it probably wouldn't be reliable for long unless you were using purified...

What is the decomposition formula? 290 isn't really hot if you are burning something in open air even and since it is a lousy fuel it doesn't have any possibilities in a furnace type burner but...

KOH only and always

I have tried this mixing an entire batch of glyc to clean the next lot of oil. The result was astounding with beautiful clean oil from crap with a tiny titration. Unfortunately the glycerol...

I think it might be used in a diesel fuel additive to lower cloud point. So now comes the easy part - how do I purify my byproduct?

I bought 2 dead Mazda Capellas from a biodiesel guy; sitting 8 years. He had started out doing all the right things then stopped using a biocide. One car had to have the whole fuel system replaced,...

Anyone out there have or know of a supplier re a couple old 45 mm.dia. ceramic and nichrome wire hot water heating elements? I use them in my bio processor etc. they don't last forever and are...

The best reagent to remove water from NaOH is obviously Na. Putting some in your sealed flask will extract every bit of oxygen and moisture from the contained air. I would first flush it with...

Thanks
I don't actually have the injector pump to fix unfortunately but that is a really great series on dis/reassembling.

Grey import blues: Does anyone have repair manuals hard copy or digital or even wiring diagrams for '89 on mazda diesel capella or a diesel injection pump for a Toyota 2C motor (93 corolla)? Or even...

Out of interest I took the byproduct off a batch and after about four days when almost no more was forthcoming set aside a 4 litre bottle of fresh unwashed bio and allowed to settle for 5 weeks. At...

Easy isn't necessarily the best. I personally use the old fashioned ceramic elements with nichrome springs all through them - you can weld a close fitting steel tube right through the processor body...

Wow Tony -After all this time you are a newby!!! And on the same learning curve as everybody. Pumps: my first processor has a cast iron centrifugal pump that I got for nothing at the recycler...

Having saved two early nineties capellas from the recycler - converting one to a manual naturally- aspirated with a near new import motor and the other a supercharged automatic. They had been sitting...

And at 125 thousand the camshaft and lifters were stuffed. It was a design fault to do with the PD configuration - the 4 cam lobes for the injectors are about 35 mm wide, so the rest of the cams...

Actually I have had no problem with 100% biodiesel in a 2 litre PD VW caddy except with the dealer who threw away all the bio in the tank when it got towed in having let my wife down in the back of...

Trying to do up an injection pump (need a cam plate because the pump was sitting full of bio too many years) and find this is a difficult animal to pin down. Anybody have or know someone.....?...

Yeah they are doing that to us here. Maybe someone smarter than me can work some kind of system to dump your 8c excess whenever it is being produced into your hot water tank as a political act if...

I designed and built an industrial size and engineer certificated, insurable flame proof motors etc. system for a friend out of a milk vat. The vat had its own associated refrigeration so it is...

Thanks Tony
But I guarantee there is a computer, it is inside on the floor just under and forward of the radio. What it really does I know not but those weird little prong thingy connections on top...

I want to put a naturally- aspirated, standard trans setup in a supercharged '92 automatic. Like sometimes less really is more. Does anyone know where I can get wiring diagrams so as to sort out...