Results 1 to 10 of 46

Thread: looking at converting my 2002 Landcruiser with 1HZ engine to WVO

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Oct 2018
    Location
    Booral NSW
    Posts
    13

    looking at converting my 2002 Landcruiser with 1HZ engine to WVO

    Hi all,

    My first post. I am considering converting my 2002 landcruiser with a 1HZ motor to run on WVO.

    I have been ready the posts on this forum for the past week and I cannot find any info on anyone converting a 1HZ motor to SVO/WVO. a couple have been run on biodiesel.

    I am looking at purchasing a kit http://www.4x4outdoortuning.com.au/diesel-to-vegetable-oil-conversion/diesel-wvo-vegetable-oil-conversion/to-75-kw-100-hp-diesel-to-vegetable-oil-conversion-svo-wvo-kit-12v-24v.html. would this kit be suitable or should I source individual components myself.

    I have 1HZ motor (320,000 kms) with a rotary IP (Denso) indirect injection. I have ready rotary Injection pumps are not preferred, but will be ok if oil heated sufficiently.

    The landcruiser already has 2 tanks so I was wondering if I can use the main tank for the WVO and the secondary for diesel to startup and purge?

    I have a steady supply of oil from 2 sources in Newcastle. I currently go through around 80-100 litres of diesel a week, so converting will save me $$$ quickly. Mostly freeway driving. I have already been collecting for the last month. I currently have 2 x 220L blue plastic barrels settling the oil that I filtered through a plastic fly screen and then bed sheet. Just bought a couple of 1 micron filter from Tony from west oz on ebay and will put the settled oil through these before transfering into another 2 barrels.

    Look forward to getting further advise from you all and also sharing my experience as I go through the process.

    Regards
    Paul

  2. #2
    Join Date
    Sep 2005
    Location
    WA
    Posts
    4,352

    Re: looking at converting my 2002 Landcruiser with 1HZ engine to WVO

    Paul, Welcome to the forum.
    I recommend that you source the components yourself.
    As you already have 2 tanks, you need to identify how they are configured. Is the return line switched so that the veggie oil goes back to its own tank and the diesel to its tank? If not, you may need to make sure it does. It is most likely that it is that way.

    The kit you linked has components you are unlikely to need.
    Your tanks already have a switch to select the tank in use and the valves that the switch controls.
    You can easily make a heat exchanger by soldering a 1/4" copper pipe to a copper pipe of the same size as the heater hoses. Using the heater circuit is best as it heats up faster than the radiator (due to thermostat).
    The rest of the kit is just the bells and whistles that add to the cost.
    The additional fuel filter is easy. Just get a Toyota fuel filter head from a wreckers.
    You should install the veggie oil filter in the fuel line from the veggie oil tank before the changeover valve.
    feel free to ask if you feel you need help.
    Life is a journey, with problems to solve, lessons to learn, but most of all, experiences to enjoy.

    Current Vehicles in stable:
    '06 Musso Sports 4X4 Manual Crew Cab tray back.
    '04 Rexton 4X4 Automatic SUV
    '2014 Toyota Prius (on ULP) - Wife's car

    Previous Vehicles:
    '90 Mazda Capella. (2000 - 2003) My first Fatmobile. Converted to fun on veggie oil with a 2 tank setup.
    '80 Mercedes 300D. 2 tank conversion [Sold]
    '84 Mercedes 300D. 1 tank, no conversion. Replaced engine with rebuilt OM617A turbodiesel engine. Finally had good power. Engine donor for W123 coupe. (body parted out and carcass sold for scrap.)
    '85 Mercedes Benz W123 300CD Turbodiesel
    '99 Mercedes W202 C250 Turbodiesel (my darling Wife's car)[sold]
    '98 Mercedes W202 C250 Turbodiesel (my car)[sold]
    '06 Musso Sports Crew Cab well body. [Head gasket blew!]
    '04 Rexton SUV 2.9L Turbodiesel same as Musso - Our Family car.
    '06 Musso sports Crew Cab Trayback - My hack (no air cond, no heater).

    Searching the Biofuels Forum using Google
    Adding images and/or documents to your posts


  3. #3
    Join Date
    Apr 2011
    Location
    Lismore NSW
    Posts
    394

    Re: looking at converting my 2002 Landcruiser with 1HZ engine to WVO

    Hi Paul,

    Welcome to the world of grease :-)

    First of all, I have been running this kit in my first WVO converted car which was a Hilux. It all depends on what your capabilities are. Dirk who sells these kits also installs them very neatly. I had him doing it for me as I did not have much of an idea at the time and didn't want to get stuck on the side of the road on my way to work because a connection came lose or so on.
    The kit itself is very tidy, you get the control panel in the cab, just flick it to auto and it will change once the coolant is hot. It will beep if you forgot to flush the fuel lines and shut off the engine. No need to flush if you're stopping for less than 45 minutes.
    all components are well designed and thought trough.
    To sum it up, if you're after something to get you started, have the money for it and want peace of mind, I would highly recommend it.
    If you're handy with electrics and don't mind trail and error give it a go yourself.
    I run my own business and calling up the client to say I have a broken down vehicle was not very appealing :-)
    I made Bio as a start up fuel and came across a 1200ltr VAT, so no need for WVO anymore, however, I have done a convertion on the Landcruiser so I can run WVO on the long distance trips, but I have to manually do all the switching and have to remember to flush the fuel lines.
    Your 1HZ will do fine, just don't be to stingy with the flushing times, set it to the higher site and you'll be fine.
    1990 Toyota Hilux LN106 with ATG 2 tank system (sold after running 150.000 ks on mainly WVO)

    1993 Toyota 75 Series with 1 HDT conversion, 75l factory tank and a custom 170l under tray tank. (Retired with 680.000ks on the clock mostly running on BIO and on WVO)

    2006 Landcruiser Troopcarrier 1HZ with DTS Turbo Kit, 170ltr long range tank currently not converted, running on B100

    "him who never made a mistake, made no discovery either"


  4. #4
    Join Date
    Nov 2005
    Location
    Tasmania
    Posts
    537

    Re: looking at converting my 2002 Landcruiser with 1HZ engine to WVO

    G'day Paul, I run a 1hdt series 80 cruiser on VO, as long as you have it set up right it works well. I don't use a kit, made it up myself and you need to have the following for it to work in my opinion. A good heat exchanger, inline filter, bypass the return lines to the tanks and an inline pump. Without a push pump, in cold weather the engine may tend to starve as the oils is thick and during winter her in Tas, I put 10% dino.bd in the vo. On all my other engines, have 12mm fuel lines, but these engines have 10mm lines and by re-routing the returns, the pumps don't have to work hard and you get heated fuel quicker after starting. If you don't re-route the return lines, you will end up contaminating your aux with vo and that may lead to trouble

    That way you can use the aux tank for dino/BD and the main for VO, I also have a 5lt purge tank under the bonnet for emergencies and you must purge for at least 12klm, I do 16-20klm. Some where on this forum there is a post of mine with photo's of the setup, it's easy to do and doing it yourself, means you know the system so can fix any problems that arise.

    My 1hdt has only done about 7000klms on VO, but have been running Di in a 60series 12ht for years without any problems. Had a main tank fuel block in mine a couple of weeks ago and it was just a matter of switching tanks and pumping the fuel through with the inline pump. If you decide to do it yourself, don't hesitate to ask questions here.
    Last edited by Alga; 22nd October 2018 at 02:10 PM.

  5. #5
    Join Date
    Jan 2006
    Location
    ลึก ประเทศอินเด&
    Posts
    2,170

    Re: looking at converting my 2002 Landcruiser with 1HZ engine to WVO

    Hi Alga,

    Quote Originally Posted by Alga View Post
    G'day I put 10% dino.bd in the vo.
    I am curious what "dino.bd" is

  6. #6
    Join Date
    Apr 2011
    Location
    Lismore NSW
    Posts
    394

    Re: looking at converting my 2002 Landcruiser with 1HZ engine to WVO

    Quote Originally Posted by tillyfromparadise View Post
    Hi Alga,

    I am curious what "dino.bd" is
    ​Really Tilly???
    1990 Toyota Hilux LN106 with ATG 2 tank system (sold after running 150.000 ks on mainly WVO)

    1993 Toyota 75 Series with 1 HDT conversion, 75l factory tank and a custom 170l under tray tank. (Retired with 680.000ks on the clock mostly running on BIO and on WVO)

    2006 Landcruiser Troopcarrier 1HZ with DTS Turbo Kit, 170ltr long range tank currently not converted, running on B100

    "him who never made a mistake, made no discovery either"


  7. #7
    Join Date
    May 2008
    Location
    Melbourne
    Posts
    296

    Re: looking at converting my 2002 Landcruiser with 1HZ engine to WVO

    The 1HZ engine uses a rotary injection pump.

    Blending is fine, but it's still a 2 tank conversion for you (use one of the tanks for diesel or bio diesel for purging/flushing on shutdown), unless you want to be stranded with a vehicle that won't start when the temperature drops a little and causes your blend to thicken.

    And then there's the long term wear on the pump if you somehow manage to regularly start the vehicle on a blend.
    Last edited by 83Patrol; 30th November 2018 at 08:00 AM.
    1987 Mercedes W124 300D
    1997 Ssangyong Musso Wagon

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •